Harmonised standards Machinery Directive
Archive all Communication Machinery Directive
Summary list of titles and references of harmonised standards under Directive 2006/42/EC for Machinery
Harmonised standards January 2026
Since 1 December 2018 the references of harmonised standards are published in, and withdrawn from the Official Journal of the European Union by means of 'Commission implementing decisions'.
The references published under Directive 2006/42/EC on Machinery are found in the:
- Decision (EU) 2026/80 of 12 January 2026 amending Implementing Decision (EU) 2023/1586 as regards the harmonised standard for gardening shredders and chippers (OJ L, 2026/80, 13.1.2026)
- Decision (EU) 2025/1740 of 13 August 2025 amending Implementing Decision (EU) 2023/1586 as regards harmonised standards for lifts, firefighting and rescue service vehicles, application equipment for coating materials, cranes, hoists, aircraft ground support equipment, supply and circulation equipment for liquid coating materials, power operated doors and gates, garden equipment, food processing equipment and welding equipment (OJ L, 2025/1740, 14.8.2025)
- Decision (EU) 2024/2408 of 13 September 2024 amending Implementing Decision (EU) 2023/1586 as regards harmonised standards for lifting tables, earth-moving machinery, cranes and power operated pedestrian doorsets (OJ L, 2024/2408 of 16.9.2024)
- Decision (EU) 2024/1329 of 13 May 2024 amending and correcting Implementing Decision (EU) 2023/1586 (OJ L 2024/1329 of 15.5.2024)
- Decision (EU) 2024/1256 of 26 April 2024 amending and correcting Implementing Decision (EU) 2023/1586 as regards harmonised standards for front loader agricultural machinery, all terrain vehicle quads, as well as electric motor-operated hand-held tools (OJ L 2024/1256 of 30.4.2024)
- Decision (EU) 2023/1586 of 26 july 2023 on harmonised standards for machinery drafted in support of directive 2006/42/EC of the european parliament and of the council (OJ L 194/45 of 02.08.2023)
- Decision (EU) 2023/69 of 9 January 2023 amending Implementing Decision (EU) 2019/436 as regards the harmonised standard for electrically power assisted cycles (Text with EEA relevance) (OJ L 7, 10.1.2023)
- Decision (EU) 2022/621 of 7 April 2022 amending Implementing Decision (EU) 2019/436 as regards harmonised standards for truck mixers, cranes and other machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 115/75 of 13.04.2022)
- Decision 2021/1813 of 14 October 2021 amending Implementing Decision (EU) 2019/436 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 72/12 of 3.3.2021)
- Decision 2021/377 of 2 March 2021 amending Implementing Decision (EU) 2019/436 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 72/12 of 3.3.2021)
- Decision (EU) 2020/480 of 6 November 2019 amending Implementing Decision (EU) 2019/436 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (OJ L 286/25 07 November 2019)
- Decision (EU) 2019/1863 of 6 November 2019 amending and correcting Implementing Decision (EU) 2019/436 as regards the withdrawal of references of harmonised standards for machinery from the Official Journal of the European Union (OJ L 286/25 07 November 2019)
- Decision (EU) 2019/1766 of 23 October 2019 amending Implementing Decision (EU) 2019/436 as regards harmonised standard EN ISO 19085- 3:2017 for numerically controlled boring and routing machines (OJ L 270/94 del 24 October 2019)
- Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council C/2019/1932 (OJ L 75, 19 March 2019, p. 108–119) repealed by Decision (EU) 2023/1586
- Commission communication 2018 in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (OJ C 092 of 9 March 2018) repealed by Decision (EU) 2023/1586
The summary below consolidates the references of harmonised standards published by the Commission in the Official Journal of the European Union (OJ). It reproduces information already published in the L or C series of the OJ as indicated in columns (2), (5) and/or (7). It contains all references which, when the summary was generated, still provided a presumption of conformity together with references already withdrawn from the OJ.
The Commission services provide this summary for information purposes only. Although they take every possible precaution to ensure that the summary is updated regularly and is correct, errors may occur and the summary may not be complete at a certain point in time. The summary does not as such generate legal effects.
Summary Harmonised standard list PDF
This summary was generated on 13 Januarty 2026 (EC)
| Generated on 13.1.2026 | ||||||||||
| Legislation (A) | ESO (B) | Reference and title Provision (C) (D) | Start of legal effect | Publication OJ reference | Publication Decision reference | Publication OJ date | End of legal effect | Withdrawal OJ reference | Withdrawal Decision reference | Withdrawal OJ date |
| 2006/42/EC - Machinery | CEN | EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1010-2:2006+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1010-3:2002+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1012-1:2010 Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1012-2:1996+A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-14:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-16:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
05.06.2012 | OJ C 159 | 05.06.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-17:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-1:2000+A1:2010 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-21:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-22:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-26:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-27:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-3:1999+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Winders and slitters, plying machines |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1034-3:2011 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
26.05.2010 | OJ C 136 | 26.05.2010 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 1034-4:2021 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1034-8:2012 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants |
05.06.2012 | OJ C 159 | 05.06.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up |
29.12.2009 | OJ C 214 | 08.09.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2015 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-3:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1114-2:1998+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers |
29.12.2009 | OJ C 214 | 08.09.2009 | 20.10.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 1114-3:2019 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 1127-1:2007 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.07.2014 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
18.11.2011 | OJ C 338 | 18.11.2011 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 1127-1:2019 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 1127-2:2002+A1:2008 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 115-1:2008 Safety of escalators and moving walks - Part 1: Construction and installation |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 115-1:2008+A1:2010 Safety of escalators and moving walks - Part 1: Construction and installation |
26.05.2010 | OJ C 136 | 26.05.2010 | 31.01.2019 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1175:2020 Safety of industrial trucks - Electrical/electronic requirements |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 12001:2003+A1:2009 Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 28.03.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 12001:2012 Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 12012-1:2018 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers |
29.12.2009 | OJ C 214 | 08.09.2009 | 20.10.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2024 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12012-4:2019+A1:2021 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12013:2000+A1:2008 Plastics and rubber machines - Internal mixers - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 12013:2018 Plastics and rubber machines - Internal mixers - Safety requirements |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 12016:2004+A1:2008 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 12041:2000+A1:2009 Food processing machinery - Moulders - Safety and hygiene requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12042:2005+A1:2010 Food processing machinery - Automatic dividers - Safety and hygiene requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12042:2014 Food processing machinery - Automatic dough dividers - Safety and hygiene requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12043:2000+A1:2010 Food processing machinery - Intermediate provers - Safety and hygiene requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12053:2001+A1:2008 Safety of industrial trucks - Test methods for measuring noise emissions |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12077-2:1998+A1:2008 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
29.12.2009 | OJ C 214 | 08.09.2009 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 12077-2:2024 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12110:2002+A1:2008 Tunnelling machines - Air locks - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12110:2014 Tunnelling machines - Air locks - Safety requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12111:2002+A1:2009 Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12111:2014 Tunnelling machines - Road headers and continuous miners - Safety requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12158-1:2000+A1:2010 Builders' hoists for goods - Part 1: Hoists with accessible platforms |
08.04.2011 | OJ C 110 | 08.04.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12158-1:2021 Builders' hoists for goods - Part 1: Hoists with accessible platforms |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12158-2:2000+A1:2010 Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12159:2000+A1:2009 Builders hoists for persons and materials with vertically guided cages |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.05.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12159:2012 Builders hoists for persons and materials with vertically guided cages |
05.04.2013 | OJ C 99 | 05.04.2013 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 12159:2024 Builders hoists for persons and materials with vertically guided cages |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12162:2001+A1:2009 Liquid pumps - Safety requirements - Procedure for hydrostatic testing |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1218-1:1999+A1:2009 Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1218-2:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1218-3:2001+A1:2009 Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1218-4:2004+A2:2009 Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.03.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1218-5:2004+A1:2009 Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12254:1998+A2:2008 Screens for laser working places - Safety requirements and testing |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 12254:2010 Screens for laser working places - Safety requirements and testing EN 12254:2010/AC:2011 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12268:2003+A1:2010 Food processing machinery - Band saw machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 12301:2019 Plastics and rubber machines - Calenders - Safety requirements |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | 02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN 12301:2019 Plastics and rubber machines - Calenders - Safety requirements EN 12301:2019/AC:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-10:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-12:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-12:2017 Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-13:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-13:2017 Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-14:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-14:2014 Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-15:2006+A1:2009 Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-16:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-17:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-18:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-19:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-1:2001+A1:2009 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-1:2013 Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-2:2002+A1:2009 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-2:2014 Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-3:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.07.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-3:2017 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
09.06.2017 | OJ C 183 | 09.06.2017 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 12312-3:2017+A1:2020 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-4:2003+A1:2009 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-4:2014 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
11.07.2014 | OJ C 220 | 11.07.2014 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 12312-4:2024 Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 12312-5:2021 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 |
| 2006/42/EC - Machinery | CEN | EN 12312-5:2021+A1:2025 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-6:2004+A1:2009 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/antiicing equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-6:2017 Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 12312-7:2020 Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-8:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and platforms |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 12312-8:2018 Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 12312-9:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders Warning: This publication does not concern clause 5.6 of the standard, the application of which does not confer a presumption of conformity with the essential health and safety requirement 1.5.15 of Annex I to Directive 2006/42/EC, in conjunction with the requirement 1.1.2(b) of that Annex. |
08.09.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12312-9:2013 Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12331:2003+A2:2010 Food processing machinery - Mincing machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 02.02.2024 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12331:2021 Food processing machinery - Mincing machines - Safety and hygiene requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12348:2000+A1:2009 Core drilling machines on stand - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12355:2022 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12385-10:2003+A1:2008 Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12385-2:2002+A1:2008 Steel wire ropes - Safety - Part 2: Definitions, designation and classification |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12385-3:2004+A1:2008 Steel wire ropes - Safety - Part 3: Information for use and maintenance |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12385-4:2002+A1:2008 Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12385-5:2021 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | 02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN 12385-5:2021 Steel wire ropes - Safety - Part 5: Stranded ropes for lifts EN 12385-5:2021/AC:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12409:2008 Plastics and rubber machines - Thermoforming machines - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety requirements |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 12417:2001+A2:2009 Machine tools - Safety - Machining centres EN 12417:2001+A2:2009/AC:2010 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12418:2021 Masonry and stone cutting-off machines for job site - Safety |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12453:2017+A1:2021 Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 12463:2004+A1:2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
20.07.2011 | OJ C 214 | 20.07.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1247:2004+A1:2010 Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1248:2001+A1:2009 Foundry machinery - Safety requirements for abrasive blasting equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12525:2000+A2:2010 Agricultural machinery - Front loaders - Safety |
26.05.2010 | OJ C 136 | 26.05.2010 | OJ L | 30.04.2024 | |||
| 2006/42/EC - Machinery | CEN | EN 12525:2000+A2:2010 Agricultural machinery - Front loaders - Safety Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires technical measures, and not organisational ones such as protective structures specifically mitigating falling objects instead of addressing other accident scenarios including vehicle roll-over events, and point 1.7.4.2 (l) of Annex I to Directive 2006/42/EC, which requires information about the residual risks that remain despite the inherent safe design measures, safeguarding and complementary protective measures adopted. |
30.04.2024 | OJ L | 2024/1256 | 30.04.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 12545:2000+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12547:1999+A1:2009 Centrifuges - Common safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12547:2014 Centrifuges - Common safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12549:1999+A1:2008 Acoustics - Noise test code for fastener driving tools - Engineering method |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety |
08.04.2011 | OJ C 110 | 08.04.2011 | 30.06.2017 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12609:2021 Truck mixers - Safety requirements |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 12621:2025 Machinery for supply and circulation of liquid coating materials - Safety requirements |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12622:2009 Safety of machine tools - Hydraulic press brakes |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.04.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 12622:2009+A1:2013 Safety of machine tools - Hydraulic press brakes |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-1:2000+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-2:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-3:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-4:2001+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-5-1:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-5-2:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-5-3:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-5-4:2003+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-6:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-7:2004+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12629-8:2002+A1:2010 Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use |
29.12.2009 | OJ C 214 | 08.09.2009 | OJ C 14 | 15.01.2016 | |||
| 2006/42/EC - Machinery | CEN | EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use Warning: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC. |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12643:1997+A1:2008 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.08.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 12643:2014 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modified) |
11.07.2014 | OJ C 220 | 11.07.2014 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12649:2008 Concrete compactors and smoothing machines - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2012 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 12649:2008+A1:2011 Concrete compactors and smoothing machines - Safety |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1265:1999+A1:2008 Safety of machinery - Noise test code for foundry machines and equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 12733:2018 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 12750:2001+A1:2009 Safety of woodworking machines - Four-sided moulding machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12750:2013 Safety of woodworking machines - Four sided moulding machines |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12779:2004+A1:2009 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety related performances and safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12786:2013 Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 12851:2005+A1:2010 Food processing machinery - Catering attachments for machines having an auxiliary drive hub - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 15.01.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12853:2001+A1:2010 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements EN 12853:2001+A1:2010/AC:2010 |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12881-1:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12882:2008 Conveyor belts for general purpose use - Electrical and flammability safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 12882:2015 Conveyor belts for general purpose use - Electrical and flammability safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 12965:2019 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
29.12.2009 | OJ C 309 | 18.12.2009 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 12978:2024 Industrial, commercial and garage doors and gates and pedestrian doorsets - Protective devices for power operated doors and gates - Requirements and test methods |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 12999:2011 Cranes - Loader cranes |
08.04.2011 | OJ C 110 | 08.04.2011 | 31.12.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 12999:2011+A1:2012 Cranes - Loader cranes |
24.08.2012 | OJ C 256 | 24.08.2012 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 12999:2011+A2:2018 Cranes - Loader cranes |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 |
| 2006/42/EC - Machinery | CEN | EN 12999:2020 Cranes - Loader cranes |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13000:2010 Cranes - Mobile cranes EN 13000:2010/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 13000:2010+A1:2014 Cranes - Mobile cranes |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 13001-1:2004+A1:2009 Cranes - General design - Part 1: General principles and requirements EN 13001-1:2004+A1:2009/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13001-2:2004+A3:2009 Crane safety - General design - Part 2: Load effects |
29.12.2009 | OJ C 214 | 08.09.2009 | 18.11.2011 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 13001-2:2011 Crane safety - General design - Part 2: Load actions EN 13001-2:2011/AC:2012 |
18.11.2011 | OJ C 338 | 18.11.2011 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13001-2:2014 Crane safety - General design - Part 2: Load actions |
15.01.2016 | OJ C 14 | 15.01.2016 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 13001-2:2021 Crane safety - General design - Part 2: Load actions |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 13001-3-1:2012 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
05.06.2012 | OJ C 159 | 05.06.2012 | 31.01.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 13001-3-1:2012+A1:2013 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
28.11.2013 | OJ C 348 | 28.11.2013 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks |
09.06.2017 | OJ C 183 | 09.06.2017 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13001-3-5:2016+A1:2021 Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13001-3-6:2018 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 |
| 2006/42/EC - Machinery | CEN | EN 13001-3-6:2018+A1:2021 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 13015:2001+A1:2008 Maintenance for lifts and escalators - Rules for maintenance instructions |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13020:2004+A1:2010 Road surface treatment machines - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13020:2015 Road surface treatment machines - Safety requirements |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13021:2003+A1:2008 Winter service machines - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-3:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines EN 13035-3:2003+A1:2009/AC:2010 |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-4:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-5:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-6:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-7:2006+A1:2009 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13042-5:2003+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13113:2002+A1:2010 Tannery machines - Roller coating machines - Safety requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13120:2009 Internal blinds - Performance requirements including safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.08.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 13120:2009+A1:2014 Internal blinds - Performance requirements including safety EN 13120:2009+A1:2014/AC:2015 |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 13128:2001+A2:2009 Safety of machine tools - Milling machines (including boring machines) EN 13128:2001+A2:2009/AC:2010 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment |
20.10.2010 | OJ C 284 | 20.10.2010 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 13135-2:2004+A1:2010 Cranes - Equipment - Part 2: Non-electrotechnical equipment |
08.04.2011 | OJ C 110 | 08.04.2011 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 13135:2013 Cranes - Safety - Design - Requirements for equipment |
28.11.2013 | OJ C 348 | 28.11.2013 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 13135:2013+A1:2018 Cranes - Safety - Design - Requirements for equipment |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13204:2004+A1:2012 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
24.08.2012 | OJ C 256 | 24.08.2012 | 30.11.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 13204:2016 Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13218:2002+A1:2008 Machine tools - Safety - Stationary grinding machines |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2017 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
18.11.2011 | OJ C 338 | 18.11.2011 | 30.06.2018 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13241-1:2003+A1:2011 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics Warning: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC. |
15.01.2016 | OJ C 14 | 15.01.2016 | 30.06.2018 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates - Product standard, performance characteristics |
09.06.2017 | OJ C 183 | 09.06.2017 | OJ L 286 | 07.11.2019 | |||
| 2006/42/EC - Machinery | CEN | EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates - Product standard, performance characteristics Restriction: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC. |
19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 13367:2005+A1:2008 Ceramic machines - Safety - Transfer platforms and cars EN 13367:2005+A1:2008/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-4:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2011 | OJ C 214 | 20.07.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
20.07.2011 | OJ C 214 | 20.07.2011 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13411-8:2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging |
18.11.2011 | OJ C 338 | 18.11.2011 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13414-3:2003+A1:2008 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13418:2004+A1:2008 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 13448:2001+A1:2009 Agricultural and forestry machinery - Inter-row mowing units - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13457:2004+A1:2010 Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection |
29.12.2009 | OJ C 214 | 08.09.2009 | 09.09.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13524:2003+A1:2009 Highway maintenance machines - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.08.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements |
11.07.2014 | OJ C 220 | 11.07.2014 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 08.01.2015 | OJ L 365 | 2014/934 | 19.12.2014 | |
| 2006/42/EC - Machinery | CEN | EN 13525:2020 Forestry machinery - Wood chippers - Safety |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13534:2006+A1:2010 Food processing machinery - Curing injection machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13557:2003+A2:2008 Cranes - Controls and control stations |
29.12.2009 | OJ C 214 | 08.09.2009 | 16.03.2026 | OJ L | 2024/2408 | 16.09.2024 | |
| 2006/42/EC - Machinery | CEN | EN 13557:2024 Cranes - Control devices and control stations |
16.09.2024 | OJ L | 2024/2408 | 16.09.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 13561:2004+A1:2008 External blinds - Performance requirements including safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2017 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13561:2015 External blinds and awnings - Performance requirements including safety EN 13561:2015/AC:2016 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13586:2004+A1:2008 Cranes - Access |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 13586:2020 Cranes - Access |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13617-1:2004+A1:2009 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
24.08.2012 | OJ C 256 | 24.08.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13617-1:2021 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13659:2004+A1:2008 Shutters - Performance requirements including safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2017 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13659:2015 Shutters and external venetian blinds - Performance requirements including safety |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13675:2004+A1:2010 Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13683:2003+A1:2009 Garden equipment - Integrally powered shredders/chippers - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 20.07.2011 | OJ C 214 | 20.07.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 13683:2003+A2:2011 Garden equipment - Integrally powered shredders/chippers - Safety EN 13683:2003+A2:2011/AC:2013 |
20.07.2011 | OJ C 214 | 20.07.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 13684:2004+A2:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.06.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
26.05.2010 | OJ C 136 | 26.05.2010 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 13684:2018 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 |
| 2006/42/EC - Machinery | CEN | EN 13684:2018+A1:2024 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 13731:2007 Lifting bag systems for fire and rescue service use - Safety and performance requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13732:2002+A2:2009 Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, performance, suitability for use, safety and hygiene |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13732:2022 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses |
29.12.2009 | OJ C 214 | 08.09.2009 | 19.09.2021 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1374:2000+A1:2010 Agricultural machinery - Silos stationary unloaders for round silos - Safety |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 13852-3:2021 Cranes - Offshore cranes - Part 3: Light offshore cranes |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 13862:2001+A1:2009 Floor cutting-off machines - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13862:2021 Floor cutting-off machines - Safety |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13870:2005+A1:2010 Food processing machinery - Chop cutting machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.03.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13870:2015+A1:2021 Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13871:2005+A1:2010 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 13885:2022 Food processing machinery - Clipping machines - Safety and hygiene requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 13898:2003+A1:2009 Machine tools - Safety - Sawing machines for cold metal EN 13898:2003+A1:2009/AC:2010 |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 13951:2003+A1:2008 Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hygiene in use |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.10.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 13951:2012 Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 13977:2011 Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
20.07.2011 | OJ C 214 | 20.07.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1398:2009 Dock levellers - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14017:2005+A1:2008 Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2010 | OJ C 309 | 18.12.2009 | ||
| 2006/42/EC - Machinery | CEN | EN 14017:2005+A2:2009 Agricultural and forestry machinery - Solid fertilizer distributors - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 14018:2005+A1:2009 Agricultural and forestry machinery - Seed drills - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 14033-3:2009 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 14033-3:2009+A1:2011 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
29.02.2012 | OJ C 61 | 29.02.2012 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 14033-3:2017 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 14033-4:2019 Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 14043:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.07.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 14043:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 14044:2005+A1:2009 High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.07.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 14044:2014 High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 14070:2003+A1:2009 Safety of machine tools - Transfer and special-purpose machines EN 14070:2003+A1:2009/AC:2010 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1417:1996+A1:2008 Plastics and rubber machines - Two roll mills - Safety requirements EN 1417:1996+A1:2008/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.12.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1417:2014 Plastics and rubber machines - Two-roll mills - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1417:2023 Plastics and rubber machines - Two-roll mills - Safety requirements |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 14238:2004+A1:2009 Cranes - Manually controlled load manipulating devices |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14439:2006+A2:2009 Cranes - Safety - Tower cranes |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14462:2005+A1:2009 Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14492-1:2006+A1:2009 Cranes - Power driven winches and hoists - Part 1: Power driven winches EN 14492-1:2006+A1:2009/AC:2010 |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14492-2:2006+A1:2009 Cranes - Power driven winches and hoists - Part 2: Power driven hoists EN 14492-2:2006+A1:2009/AC:2010 |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1459-1:2017 Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 1459-2:2015 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
15.01.2016 | OJ C 14 | 15.01.2016 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 1459-2:2015+A1:2018 Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 1459-5:2020 Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1459:1998+A3:2012 Safety of industrial trucks - Self-propelled variable reach trucks |
23.03.2012 | OJ C 87 | 23.03.2012 | 30.09.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14656:2006+A1:2010 Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14658:2005+A1:2010 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14673:2006+A1:2010 Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14681:2006+A1:2010 Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14710-1:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14710-2:2005+A2:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14861:2004+A1:2009 Forest machinery - Self propelled machinery - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.05.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14930:2007+A1:2009 Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1493:1998+A1:2008 Vehicle lifts |
29.12.2009 | OJ C 214 | 08.09.2009 | 08.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 1493:2010 Vehicle lifts |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1495:1997+A2:2009 Lifting platforms - Mast climbing work platforms EN 1495:1997+A2:2009/AC:2010 Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC. |
18.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 14973:2006+A1:2008 Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 14973:2015 Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 14985:2012 Cranes - Slewing jib cranes |
23.03.2012 | OJ C 87 | 23.03.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15000:2008 Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1501-1:1998+A2:2009 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 1: Rear-end loaded refuse collection vehicles |
29.12.2009 | OJ C 321 | 29.12.2009 | 29.02.2012 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 1501-1:2011 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
18.11.2011 | OJ C 338 | 18.11.2011 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1501-1:2011+A1:2015 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
15.01.2016 | OJ C 14 | 15.01.2016 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1501-1:2021 Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
29.12.2009 | OJ C 321 | 29.12.2009 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1501-2:2021 Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
29.12.2009 | OJ C 214 | 08.09.2009 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1501-3:2021 Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 1501-4:2007 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1501-4:2023 Refuse collection vehicles - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 1501-5:2011 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
18.11.2011 | OJ C 338 | 18.11.2011 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1501-5:2021 Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 15011:2011 Cranes - Bridge and gantry cranes |
20.07.2011 | OJ C 214 | 20.07.2011 | 31.08.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes |
11.07.2014 | OJ C 220 | 11.07.2014 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 15011:2020 Cranes - Bridge and gantry cranes |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15056:2006+A1:2009 Cranes - Requirements for container handling spreaders |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15059:2009 Snow grooming equipment - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 15059:2009+A1:2015 Snow grooming equipment - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 15061:2007+A1:2008 Safety of machinery - Safety requirements for strip processing line machinery and equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15093:2008 Safety of Machinery - Safety requirements for hot flat rolling mills |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15094:2008 Safety of Machinery - Safety requirements for cold flat rolling mills |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15095:2007+A1:2008 Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15163-1:2022 Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 15163-2:2022 Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 15163:2008 Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2024 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15166:2008 Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 15.05.2026 | OJ L 7 | 2024/1329 | 10.01.2023 |
| 2006/42/EC - Machinery | CEN | EN 15194:2017 Cycles - Electrically power assisted cycles - EPAC Bicycles Restriction 1: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.5, 1.5.6 and 1.5.7 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks associated with extreme temperatures, fire and explosion. Restriction 2: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery. |
10.01.2023 | OJ L 7 | 2023/69 | 10.01.2023 | 15.05.2026 | OJ L | 2024/1329 | 15.05.2024 |
| 2006/42/EC - Machinery | CEN | EN 15194:2017+A1:2023 Cycles - Electrically power assisted cycles - EPAC Bicycles Restriction: Harmonised standard EN 15194:2017+A1:2023 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery. |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1539:2009 Dryers and ovens, in which flammable substances are released - Safety requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 15503:2009 Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.04.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 15503:2009+A1:2013 Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
11.04.2014 | OJ C 110 | 11.04.2014 | 30.06.2017 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 15503:2009+A2:2015 Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1550:1997+A1:2008 Machine-tools safety - Safety requirements for the design and construction of work holding chucks |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1554:2012 Conveyor belts - Drum friction testing |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15571:2020 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 15572:2015 Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 15695-1:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 15695-1:2017 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 15695-2:2009 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 15695-2:2017 Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN 1570-1:2011 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
29.02.2012 | OJ C 61 | 29.02.2012 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1570-1:2011+A1:2014 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
13.05.2016 | OJ C 173 | 13.05.2016 | 16.03.2026 | OJ L | 2024/2408 | 16.09.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1570-1:2024 Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landing |
16.09.2024 | OJ L | 2024/2408 | 16.09.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 1570-2:2016 Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN 15700:2011 Safety for conveyor belts for winter sport or leisure use |
29.02.2012 | OJ C 61 | 29.02.2012 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 15700:2023 Safety for conveyor belts for winter sport or tourist use Restriction: With regard to paragraph 7.3 of this harmonised standard, compliance with this harmonised standard does not confer a presumption of conformity to the essential health and safety requirement 1.7.4.2. (u) of Annex I to Directive 2006/42/EC. |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 1570:1998+A2:2009 Safety requirements for lifting tables |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 15746-2:2010 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 30.04.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 15811:2009 Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007 modified) |
29.12.2009 | OJ C 309 | 18.12.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 15811:2014 Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 15830:2012 Rough-terrain variable reach trucks - Visibility - Test methods and verification |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15861:2012 Food processing machinery - Smokehouses - Safety and hygiene requirements |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15895:2011 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
18.11.2011 | OJ C 338 | 18.11.2011 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 15895:2011+A1:2018 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 15949:2012 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
05.06.2012 | OJ C 159 | 05.06.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 15954-2:2013 Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 15955-2:2013 Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
18.11.2011 | OJ C 338 | 18.11.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 15967:2022 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 15997:2011 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods EN 15997:2011/AC:2012 |
29.02.2012 | OJ C 61 | 29.02.2012 | OJ L | 30.04.2024 | |||
| 2006/42/EC - Machinery | CEN | EN 15997:2011 All terrain vehicles (ATVs - Quads) - Safety requirements and test methods EN 15997:2011/AC:2012 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires compliance with the principles of safety integration and reasonably foreseeable misuse of the vehicle, point 1.3.1. of Annex I to Directive 2006/42/EC, which requires lateral and longitudinal stability mitigation, and point 3.4.1. of Annex I to Directive 2006/42/EC, which requires prevention of uncontrolled movement. Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.1.2. of Annex I to Directive 2006/42/EC, which requires compliance with the principles of safety integration and reasonably foreseeable misuse of the vehicle, point 1.3.1. of Annex I to Directive 2006/42/EC, which requires lateral and longitudinal stability mitigation, and point 3.4.1. of Annex I to Directive 2006/42/EC, which requires prevention of uncontrolled movement. |
30.04.2024 | OJ L | 2024/1256 | 30.04.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 16005:2012 Power operated pedestrian doorsets - Safety in use - Requirements and test methods EN 16005:2012/AC:2015 |
05.04.2013 | OJ C 99 | 05.04.2013 | 16.03.2026 | OJ L | 2024/2408 | 16.09.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16005:2023+A1:2024 Power operated pedestrian doorsets - Safety in use - Requirements and test methods |
16.09.2024 | OJ L | 2024/2408 | 16.09.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 16029:2012 Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16191:2014 Tunnelling machinery - Safety requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 16203:2014 Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 16228-1:2014 Drilling and foundation equipment - Safety - Part 1: Common requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-1:2014+A1:2021 Drilling and foundation equipment - Safety - Part 1: Common requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-2:2014 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-2:2014+A1:2021 Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-3:2014 Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-3:2014+A1:2021 Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-4:2014 Drilling and foundation equipment - Safety - Part 4: Foundation equipment |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-4:2014+A1:2021 Drilling and foundation equipment - Safety - Part 4: Foundation equipment |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-5:2014 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-5:2014+A1:2021 Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-6:2014 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-6:2014+A1:2021 Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16228-7:2014 Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment |
13.02.2015 | OJ C 54 | 13.02.2015 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 16228-7:2014+A1:2021 Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16230-1:2013 Leisure karts - Part 1: Safety requirements and test methods for karts |
28.11.2013 | OJ C 348 | 28.11.2013 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 16230-1:2013+A1:2014 Leisure karts - Part 1: Safety requirements and test methods for karts |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 16246:2012 Agricultural machinery - Backhoes - Safety |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 16252:2012 Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 16307-1:2013 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
05.04.2013 | OJ C 99 | 05.04.2013 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 16307-1:2013+A1:2015 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
15.01.2016 | OJ C 14 | 15.01.2016 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 16307-1:2020 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16307-5:2013 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks |
11.07.2014 | OJ C 220 | 11.07.2014 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16307-5:2023 Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 16307-6:2014 Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 16474:2015 Plastics and rubber machines - Tyre curing machines - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 16486:2014+A1:2020 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16500:2014 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 16517:2021 Agricultural and forestry machinery - Mobile yarders for timber logging - Safety |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16564:2020 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16590-1:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified) |
13.02.2015 | OJ C 54 | 13.02.2015 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16590-2:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
13.02.2015 | OJ C 54 | 13.02.2015 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16590-3:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified) |
13.02.2015 | OJ C 54 | 13.02.2015 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16590-4:2014 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010 modified) |
13.02.2015 | OJ C 54 | 13.02.2015 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16 |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 16719:2018 Transport platforms |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 16743:2016 Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1674:2000+A1:2009 Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 31.03.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 16770:2018 Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 16774:2016 Safety of machinery - Safety requirements for steel converter and associated equipment |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 1679-1:1998+A1:2011 Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines |
20.07.2011 | OJ C 214 | 20.07.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 16808:2020 Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16851:2017 Cranes - Light crane systems |
09.06.2017 | OJ C 183 | 09.06.2017 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 16851:2017+A1:2020 Cranes - Light crane systems |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 16952:2018 Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN 16952:2018+A1:2021 Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 16985:2018 Spray booths for organic coating material - Safety requirements |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 17003:2021 Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17059:2018 Plating and anodizing lines - Safety requirements |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 17067:2018 Forestry machinery - Safety requirements on radio remote controls |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 17088:2021 Side curtain ventilation systems - Safety |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17106-1:2021 Road operation machinery - Safety - Part 1: General requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17106-2:2021 Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17106-3-1:2021 Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17106-3-2:2021 Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17106-4:2021 Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines EN 1710:2005+A1:2008/AC:2010 |
29.12.2009 | OJ C 214 | 08.09.2009 | 19.03.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 17281:2021 Safety requirements - Vehicle cleaning equipment |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17348:2022 Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17352:2022 Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 1755:2000+A1:2009 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1755:2000+A2:2013 Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2024 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
29.12.2009 | OJ C 214 | 08.09.2009 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1756-1:2021 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1760-1:1997+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1760-2:2001+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1760-3:2004+A1:2009 Safety of machinery - Pressure sensitive protective devices - Part 3: General principles for the design and testing of pressure sensitive bumpers, plates, wires and similar devices |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 17624:2022 Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 17677:2024 Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 1777:2004+A1:2009 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.09.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 17942:2024 Welding and allied processes - Gas welding equipment - Safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1804-1:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
26.05.2010 | OJ C 136 | 26.05.2010 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1804-2:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems |
26.05.2010 | OJ C 136 | 26.05.2010 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1804-3:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1807-1:2013 Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 1807-2:2013 Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1807:1999+A1:2009 Safety of woodworking machines - Band sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1808:1999+A1:2010 Safety requirements on Suspended Access Equipment - Design calculations, stability criteria, construction - Tests |
20.10.2010 | OJ C 284 | 20.10.2010 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines |
26.05.2010 | OJ C 136 | 26.05.2010 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 1829-1:2021 High-pressure water jet machines - Safety requirements - Part 1: Machines |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN 1829-2:2008 High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors EN 1829-2:2008/AC:2011 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1837:2020 Safety of machinery - Integral lighting of machines |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1846-2:2001+A3:2009 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2011 | OJ C 309 | 18.12.2009 | ||
| 2006/42/EC - Machinery | CEN | EN 1846-2:2009 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1846-2:2009+A1:2013 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
28.11.2013 | OJ C 348 | 28.11.2013 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 1846-2:2024 Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 1846-3:2002+A1:2008 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1846-3:2013 Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1853:1999+A1:2009 Agricultural machinery - Trailers with tipping body - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1853:2017 Agricultural machinery - Trailers - Safety |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 1870-10:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-10:2013 Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-11:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-11:2013 Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-12:2003+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-12:2013 Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-13:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.09.2012 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-13:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
05.06.2012 | OJ C 159 | 05.06.2012 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1870-14:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.09.2012 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-14:2007+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
05.06.2012 | OJ C 159 | 05.06.2012 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1870-15:2004+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-15:2012 Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-16:2005+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-16:2012 Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-17:2007+A2:2009 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-17:2012 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) Warning: with regards to the choice of guards of the saw blade, this publication does not concern paragraphs 3 of clauses 5.3.6.1 of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.4.2 of Annex I to Directive 2006/42/EC. |
13.02.2015 | OJ C 54 | 13.02.2015 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-17:2012+A1:2015 Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-18:2013 Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
28.11.2013 | OJ C 348 | 28.11.2013 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
11.04.2014 | OJ C 110 | 11.04.2014 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1870-1:2007+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-3:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-4:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.09.2012 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
05.06.2012 | OJ C 159 | 05.06.2012 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1870-5:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.03.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-5:2002+A2:2012 Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-6:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN 1870-7:2002+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-7:2012 Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-8:2001+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.05.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-8:2012 Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 1870-9:2000+A1:2009 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.03.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 1870-9:2012 Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
18.11.2011 | OJ C 338 | 18.11.2011 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1915-1:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1915-1:2013 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | 15.11.2025 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN 1915-1:2023 Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN 1915-2:2001+A1:2009 Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1915-3:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1915-4:2004+A1:2009 Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 1953:1998+A1:2009 Atomising and spraying equipment for coating materials - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.03.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements |
28.11.2013 | OJ C 348 | 28.11.2013 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 1953:2025 Application equipment for coating materials - Safety requirements |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 1974:2020 Food processing machinery - Slicing machines - Safety and hygiene requirements |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 267:2009 Automatic forced draught burners for liquid fuels |
26.05.2010 | OJ C 136 | 26.05.2010 | 29.02.2012 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 280-1:2022 Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 280-2:2022 Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 280:2001+A2:2009 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.01.2015 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 280:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
28.11.2013 | OJ C 348 | 28.11.2013 | 28.02.2017 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests |
15.01.2016 | OJ C 14 | 15.01.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 289:2004+A1:2008 Plastics and rubber machines - Presses - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 289:2014 Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
24.08.2012 | OJ C 256 | 24.08.2012 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 303-5:2021 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN 303-5:2021+A1:2022 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 30326-1:1994 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) EN 30326-1:1994/A1:2007 |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 30326-1:1994 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:1992) EN 30326-1:1994/A1:2007 EN 30326-1:1994/A2:2011 |
29.02.2012 | OJ C 61 | 29.02.2012 | 30.11.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 378-2:2008+A2:2012 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
24.08.2012 | OJ C 256 | 24.08.2012 | 30.11.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-10:2014 Safety of packaging machines - Part 10: General Requirements |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-1:2000+A1:2009 Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment |
29.12.2009 | OJ C 214 | 08.09.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 415-1:2014 Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 415-3:2021 Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-6:2006+A1:2009 Safety of packaging machines - Part 6: Pallet wrapping machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 415-9:2009 Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 422:2009 Plastics and rubber machines - Blow moulding machines - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 453:2000+A1:2009 Food processing machinery - Dough mixers - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 454:2000+A1:2009 Food processing machinery - Planetary mixers - Safety and hygiene requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 474-10:2006+A1:2009 Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-10:2022 Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-11:2006+A1:2008 Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-11:2022 Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-12:2022 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-13:2022 Earth-moving machinery - Safety - Part 13: Requirements for rollers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A1:2009 Earth-moving machinery - Safety - Part 1: General requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A4:2013 Earth-moving machinery - Safety - Part 1: General requirements EN 474-1:2006+A4:2013/AC:2014 |
28.11.2013 | OJ C 348 | 28.11.2013 | 19.09.2020 | OJ C 87 | 2019/1863 | 13.03.2015 | |
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A4:2013 Earth-moving machinery - Safety - Part 1: General requirements EN 474-1:2006+A4:2013/AC:2014 Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. |
13.03.2015 | OJ C 87 | 13.03.2015 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements Notice: This publication does not concern clause 5.8.1 Visibility — Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 |
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A6:2019 Earth-moving machinery - Safety - Part 1: General requirements Notice: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators. |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | 11.10.2022 | OJ L 115 | 2022/621 | 13.04.2022 |
| 2006/42/EC - Machinery | CEN | EN 474-1:2006+A6:2019 Earth-moving machinery - Safety - Part 1: General requirements Restriction 1: This publication does not concern clause 5.8.1 Visibility-Operator's field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. Restriction 2: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.1.2 b), 1.1.2 c) and 1.3.3 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators. |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN 474-1:2022 Earth-moving machinery - Safety - Part 1: General requirements |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-2:2006+A1:2008 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-2:2022 Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-3:2006+A1:2009 Earth-moving machinery - Safety - Part 3: Requirements for loaders |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-3:2022 Earth-moving machinery - Safety - Part 3: Requirements for loaders EN 474-3:2022/AC:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-4:2006+A2:2012 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
23.03.2012 | OJ C 87 | 23.03.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-4:2022 Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-5:2006+A1:2009+A2:2012 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
23.03.2012 | OJ C 87 | 23.03.2012 | 31.01.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 474-5:2006+A3:2013 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-5:2022 Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators EN 474-5:2022/AC:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-6:2006+A1:2009 Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-6:2022 Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-7:2006+A1:2009 Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-7:2022 Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-8:2006+A1:2009 Earth-moving machinery - Safety - Part 8: Requirements for graders |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-8:2022 Earth-moving machinery - Safety - Part 8: Requirements for graders |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 474-9:2006+A1:2009 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 474-9:2022 Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 500-1:2006+A1:2009 Mobile road construction machinery - Safety - Part 1: Common requirements |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 500-2:2006+A1:2008 Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 500-3:2006+A1:2008 Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 500-4:2011 Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines |
20.07.2011 | OJ C 214 | 20.07.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 500-6:2006+A1:2008 Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50059:2025 Hand-held electrostatic application equipment for non-ignitable liquid coating materials - Safety requirements |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50176:2025 Automatic electrostatic application systems for ignitable liquid coating materials - Safety requirements |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50223:2010 Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
20.10.2010 | OJ C 284 | 20.10.2010 | 13.04.2018 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50348:2010 Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements EN 50348:2010/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50434:2014 Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers |
13.02.2015 | OJ C 54 | 13.02.2015 | 13.01.2026 | OJ L | 2026/80 | 13.01.2026 | |
| 2006/42/EC - Machinery | EN 50434:2014 Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers Restriction: This harmonised standard does not confer a presumption of conformity, limited to machines where the shredding means can rotate at speeds exceeding 300 r•min-1, with the essential health and safety requirements set out in point 1.1.2. (a) of Annex I to Directive 2006/42/EC, which requires that machinery must be designed and constructed so that it is fitted for its function, and can be operated without putting persons at risk when these operations are carried out under the conditions foreseen, but also taking into account any reasonably foreseeable misuse thereof, as well as point 1.3.3. of Annex I to Directive 2006/42/EC, as regards precautions that must be taken to prevent risks from ejected objects, which shall also consider long objects such as tall trees. |
13.01.2026 | OJ L | 2026/80 | 13.01.2026 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50569:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors |
11.04.2014 | OJ C 110 | 11.04.2014 | 12.01.2021 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 50569:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors EN 50569:2013/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50570:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
11.04.2014 | OJ C 110 | 11.04.2014 | 12.01.2021 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 50570:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers EN 50570:2013/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50571:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines |
11.04.2014 | OJ C 110 | 11.04.2014 | 12.01.2021 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 50571:2013 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines EN 50571:2013/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50580:2012 Safety of hand-held electric motor operated tools - Particular requirements for spray guns |
05.06.2012 | OJ C 159 | 05.06.2012 | 22.07.2016 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 50580:2012 Safety of hand-held electric motor operated tools - Particular requirements for spray guns EN 50580:2012/A1:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-100:2014 Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers |
15.01.2016 | OJ C 14 | 15.01.2016 | 12.01.2020 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers EN 50636-2-107:2015/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 |
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers EN 50636-2-107:2015/A1:2018 EN 50636-2-107:2015/A2:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 |
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers EN 50636-2-107:2015/A1:2018 EN 50636-2-107:2015/A2:2020 EN 50636-2-107:2015/A3:2021 |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-91:2014 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-92:2014 Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 50636-2-94:2014 Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 528:2008 Rail dependent storage and retrieval equipment - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2024 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 528:2021+A1:2022 Rail dependent storage and retrieval equipment - Safety requirements for S/R machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 536:2015 Road construction machines - Mixing plants for road construction materials - Safety requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | Cenelec | EN 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV EN 60204-11:2000/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | Cenelec | EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN 60204-1:2006/AC:2010 EN 60204-1:2006/A1:2009 |
26.05.2010 | OJ C 136 | 26.05.2010 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | Cenelec | EN 60204-1:2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 60204-31:2013 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60204-33:2011 Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2002/AC:2009 EN 60335-1:2002/AC:2010 EN 60335-1:2002/A11:2004 EN 60335-1:2002/A1:2004 EN 60335-1:2002/A12:2006 EN 60335-1:2002/A1:2004/AC:2007 EN 60335-1:2002/A12:2006/AC:2007 EN 60335-1:2002/A13:2008 EN 60335-1:2002/A14:2010 |
20.10.2010 | OJ C 284 | 20.10.2010 | 02.05.2014 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2002 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2002/AC:2009 EN 60335-1:2002/AC:2010 EN 60335-1:2002/A11:2004 EN 60335-1:2002/A1:2004 EN 60335-1:2002/A12:2006 EN 60335-1:2002/A1:2004/AC:2007 EN 60335-1:2002/A12:2006/AC:2007 EN 60335-1:2002/A13:2008 EN 60335-1:2002/A14:2010 EN 60335-1:2002/A15:2011 |
29.02.2012 | OJ C 61 | 29.02.2012 | 21.11.2014 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2012/AC:2014 |
05.06.2012 | OJ C 159 | 05.06.2012 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2012/AC:2014 EN 60335-1:2012/A11:2014 |
15.01.2016 | OJ C 14 | 15.01.2016 | 03.05.2020 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2012/AC:2014 EN 60335-1:2012/A11:2014 EN 60335-1:2012/A13:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 |
| 2006/42/EC - Machinery | Cenelec | EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements EN 60335-1:2012/AC:2014 EN 60335-1:2012/A11:2014 EN 60335-1:2012/A13:2017 EN 60335-1:2012/A15:2021 |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-103:2015 Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-23:2003 Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care EN 60335-2-23:2003/A2:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-36:2002 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements EN 60335-2-36:2002/AC:2007 EN 60335-2-36:2002/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers EN 60335-2-37:2002/AC:2007 EN 60335-2-37:2002/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | 25.01.2019 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-37:2002 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers EN 60335-2-37:2002/AC:2007 EN 60335-2-37:2002/A11:2012 EN 60335-2-37:2002/A12:2016 |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-40:2003 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers EN 60335-2-40:2003/A11:2004 EN 60335-2-40:2003/A12:2005 EN 60335-2-40:2003/A1:2006 EN 60335-2-40:2003/AC:2006 EN 60335-2-40:2003/A2:2009 EN 60335-2-40:2003/AC:2010 EN 60335-2-40:2003/A13:2012 EN 60335-2-40:2003/A13:2012/AC:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-42:2003 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens EN 60335-2-42:2003/AC:2007 EN 60335-2-42:2003/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-47:2003 Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans EN 60335-2-47:2003/AC:2007 EN 60335-2-47:2003/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-48:2003 Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters EN 60335-2-48:2003/AC:2007 EN 60335-2-48:2003/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-49:2003 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm EN 60335-2-49:2003/AC:2007 EN 60335-2-49:2003/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-58:2005 Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines EN 60335-2-58:2005/A2:2015 EN 60335-2-58:2005/A12:2016 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-65:2003 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances EN 60335-2-65:2003/A11:2012 |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-67:2009 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment and floor cleaning machines for commercial use |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.05.2015 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-67:2012 Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-68:2009 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines for commercial use |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.05.2015 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-68:2012 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-69:2009 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.03.2015 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-69:2012 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-72:2009 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial use |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.05.2015 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-72:2012 Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-77:2010 Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
08.04.2011 | OJ C 110 | 08.04.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-79:2009 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.04.2015 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-79:2012 Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-89:2010 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor EN 60335-2-89:2010/A1:2016 |
09.09.2016 | OJ C 332 | 09.09.2016 | 03.07.2020 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-89:2010 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor EN 60335-2-89:2010/A1:2016 EN 60335-2-89:2010/A2:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-8:2015 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances |
13.05.2016 | OJ C 173 | 13.05.2016 | 28.12.2018 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-8:2015 Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances EN 60335-2-8:2015/A1:2016 |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-95:2015 Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use EN 60335-2-95:2015/A1:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60335-2-97:2006 Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment EN 60335-2-97:2006/A12:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements EN 60745-1:2009/AC:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.10.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-1:2009 Hand-held motor-operated electric tools - Safety - Part 1: General requirements EN 60745-1:2009/AC:2009 EN 60745-1:2009/A11:2010 |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.12.2021 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-11:2010 Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
20.10.2010 | OJ C 284 | 20.10.2010 | 23.12.2019 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-12:2009 Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.12.2013 | OJ C 214 | 20.07.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws EN 60745-2-13:2009/A1:2010 |
20.07.2011 | OJ C 214 | 20.07.2011 | 03.05.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-14:2009 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.06.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-14:2009 Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers EN 60745-2-14:2009/A2:2010 |
08.04.2011 | OJ C 110 | 08.04.2011 | 31.08.2019 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-15:2009 Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers EN 60745-2-15:2009/A1:2010 |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-16:2010 Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-17:2010 Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.12.2021 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-18:2009 Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-19:2009 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.06.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-19:2009 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers EN 60745-2-19:2009/A1:2010 |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-1:2010 Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills |
20.10.2010 | OJ C 284 | 20.10.2010 | 19.01.2022 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-20:2009 Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-21:2009 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.12.2013 | OJ C 214 | 20.07.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-21:2009 Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for drain cleaners EN 60745-2-21:2009/A1:2010 |
20.07.2011 | OJ C 214 | 20.07.2011 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-22:2011 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines |
18.11.2011 | OJ C 338 | 18.11.2011 | 17.12.2015 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-22:2011 Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines EN 60745-2-22:2011/A11:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-23:2013 Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-2:2010 Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches |
20.10.2010 | OJ C 284 | 20.10.2010 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders |
18.11.2011 | OJ C 338 | 18.11.2011 | 25.02.2016 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders EN 60745-2-3:2011/A2:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 21.04.2016 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders EN 60745-2-3:2011/A2:2013 EN 60745-2-3:2011/A11:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | 17.11.2017 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders EN 60745-2-3:2011/A2:2013 EN 60745-2-3:2011/A11:2014 EN 60745-2-3:2011/A12:2014 |
15.01.2016 | OJ C 14 | 15.01.2016 | 28.09.2018 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-3:2011 Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders EN 60745-2-3:2011/A2:2013 EN 60745-2-3:2011/A11:2014 EN 60745-2-3:2011/A12:2014 EN 60745-2-3:2011/A13:2015 |
13.05.2016 | OJ C 173 | 13.05.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-4:2009 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type |
26.05.2010 | OJ C 136 | 26.05.2010 | 01.06.2013 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-4:2009 Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type EN 60745-2-4:2009/A11:2011 |
29.02.2012 | OJ C 61 | 29.02.2012 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
08.04.2011 | OJ C 110 | 08.04.2011 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-6:2010 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers |
20.10.2010 | OJ C 284 | 20.10.2010 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-8:2009 Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.05.2020 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60745-2-9:2009 Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers |
29.12.2009 | OJ C 309 | 18.12.2009 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 609-1:1999+A2:2009 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.06.2018 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN 609-1:2017 Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN 609-2:1999+A1:2009 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function EN 60947-5-5:1997/A1:2005 EN 60947-5-5:1997/A11:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 24.02.2020 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | Cenelec | EN 60947-5-5:1997 Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function EN 60947-5-5:1997/A1:2005 EN 60947-5-5:1997/A11:2013 EN 60947-5-5:1997/A2:2017 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | 01.11.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-1:2009 Safety of transportable motor-operated electric tools - Part 1: General requirements EN 61029-1:2009/AC:2009 EN 61029-1:2009/A11:2010 |
08.04.2011 | OJ C 110 | 08.04.2011 | 15.12.2021 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-10:2010 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders |
20.10.2010 | OJ C 284 | 20.10.2010 | 22.07.2016 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-10:2010 Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders EN 61029-2-10:2010/A11:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 19.10.2019 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-11:2009 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.09.2015 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-11:2012 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws |
05.04.2013 | OJ C 99 | 05.04.2013 | 12.08.2016 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-11:2012 Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws EN 61029-2-11:2012/A11:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-12:2011 Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-1:2010 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches |
20.10.2010 | OJ C 284 | 20.10.2010 | 03.09.2015 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-1:2012 Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches |
05.04.2013 | OJ C 99 | 05.04.2013 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-3:2011 Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-4:2011 Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders |
18.11.2011 | OJ C 338 | 18.11.2011 | 24.06.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-5:2011 Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws EN 61029-2-5:2011/A11:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-6:2010 Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply |
20.10.2010 | OJ C 284 | 20.10.2010 | 21.08.2019 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-8:2010 Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-9:2009 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.09.2015 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-9:2012 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws |
05.04.2013 | OJ C 99 | 05.04.2013 | 12.08.2016 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61029-2-9:2012 Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws EN 61029-2-9:2012/A11:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 15.11.2019 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61310-1:2008 Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, acoustic and tactile signals |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61310-2:2008 Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61310-3:2008 Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61496-1:2004 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests EN 61496-1:2004/AC:2010 EN 61496-1:2004/A1:2008 |
26.05.2010 | OJ C 136 | 26.05.2010 | 10.05.2015 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | Cenelec | EN 61496-1:2013 Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
11.04.2014 | OJ C 110 | 11.04.2014 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 61800-5-2:2007 Adjustable speed electrical power drive systems -- Part 5-2: Safety requirements - Functional |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
08.04.2011 | OJ C 110 | 08.04.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 619:2022 Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061:2005/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 18.12.2015 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | Cenelec | EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061:2005/AC:2010 EN 62061:2005/A1:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 31.07.2018 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 62061:2005 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061:2005/AC:2010 EN 62061:2005/A1:2013 EN 62061:2005/A2:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
08.04.2011 | OJ C 110 | 08.04.2011 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 620:2021 Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | Cenelec | EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery EN 62745:2017/A11:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements EN 62841-1:2015/AC:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | 02.02.2025 | OJ L 194 | 2024/1256 | 02.08.2023 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements EN 62841-1:2015/AC:2015 EN 62841-1:2015/A11:2022 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause. |
30.04.2024 | OJ L | 2024/1256 | 30.04.2024 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements EN 62841-1:2015/AC:2015 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause. |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | 5.2.2025 | OJ L | 2024/1256 | 30.04.2024 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-10:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws |
09.09.2016 | OJ C 332 | 09.09.2016 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws EN 62841-2-11:2016/A1:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | OJ L | 30.04.2024 | ||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws EN 62841-2-11:2016/A1:2020 Restriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in point 1.2.3. (second paragraph, first indent, applied with the first paragraph) and point 2.2.1. (first paragraph, third indent) of Annex I to Directive 2006/42/EC, which require sufficient protection against unintentional starting regardless of the cause. |
30.04.2024 | OJ L | 2024/1256 | 30.04.2024 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-14:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills EN 62841-2-1:2018/A11:2019 |
02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills EN 62841-2-1:2018/A11:2019 EN 62841-2-1:2018/A1:2022 EN 62841-2-1:2018/A12:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-21:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-2:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified) EN 62841-2-2:2014/AC:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-4:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified) EN 62841-2-4:2014/AC:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-5:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-8:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-2-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders EN 62841-2-9:2015/AC:2016-10 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines EN 62841-3-10:2015/AC:2016-07 |
13.05.2016 | OJ C 173 | 13.05.2016 | 19.10.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines EN 62841-3-10:2015/AC:2016-07 EN 62841-3-10:2015/A11:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines EN 62841-3-10:2015/AC:2016-07 EN 62841-3-10:2015/A11:2017 EN 62841-3-10:2015/A1:2022 EN 62841-3-10:2015/A12:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-12:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-13:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-14:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) EN 62841-3-1:2014/AC:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | 19.10.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) EN 62841-3-1:2014/AC:2015 EN 62841-3-1:2014/A11:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) EN 62841-3-1:2014/AC:2015 EN 62841-3-1:2014/A11:2017 EN 62841-3-1:2014/A1:2021 EN 62841-3-1:2014/A12:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders EN 62841-3-4:2016/A11:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders EN 62841-3-4:2016/A11:2017 EN 62841-3-4:2016/A1:2020 EN 62841-3-4:2016/A12:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) EN 62841-3-6:2014/AC:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | 19.10.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) EN 62841-3-6:2014/AC:2015 EN 62841-3-6:2014/A11:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) EN 62841-3-6:2014/AC:2015 EN 62841-3-6:2014/A11:2017 EN 62841-3-6:2014/A1:2022 EN 62841-3-6:2014/A12:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws EN 62841-3-9:2015/AC:2016-09 |
13.05.2016 | OJ C 173 | 13.05.2016 | 15.11.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | Cenelec | EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws EN 62841-3-9:2015/AC:2016-09 EN 62841-3-9:2015/A11:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-4-1:2020 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | Cenelec | EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | Cenelec | EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers EN 62841-4-2:2019/A1:2022 EN 62841-4-2:2019/A11:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels EN 676:2003+A2:2008/AC:2008 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 690:1994+A1:2009 Agricultural machinery - Manure spreaders - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2014 | OJ C 110 | 11.04.2014 | ||
| 2006/42/EC - Machinery | CEN | EN 690:2013 Agricultural machinery - Manure spreaders - Safety |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 19.09.2021 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 693:2001+A1:2009 Machine tools - Safety - Hydraulic presses |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.03.2012 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 693:2001+A2:2011 Machine tools - Safety - Hydraulic presses |
18.11.2011 | OJ C 338 | 18.11.2011 | 19.03.2021 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 703:2021 Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 704:1999+A1:2009 Agricultural machinery - Pick-up balers - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.06.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 706:1996+A1:2009 Agricultural machinery - Vine shoot tipping machines - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 707:1999+A1:2009 Agricultural machinery - Slurry tankers - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 707:2018 Agricultural machinery - Slurry tankers - Safety |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN 709:1997+A2:2009 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.12.2010 | OJ C 136 | 26.05.2010 | ||
| 2006/42/EC - Machinery | CEN | EN 709:1997+A4:2009 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety EN 709:1997+A4:2009/AC:2012 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 710:1997+A1:2010 Safety requirements for foundry moulding and coremaking machinery and plant associated equipment EN 710:1997+A1:2010/AC:2012 |
20.10.2010 | OJ C 284 | 20.10.2010 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 741:2000+A1:2010 Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 745:1999+A1:2009 Agricultural machinery - Rotary mowers and flail-mowers - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.12.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN 746-3:2021 Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety |
29.12.2009 | OJ C 309 | 18.12.2009 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 791:1995+A1:2009 Drill rigs - Safety |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 792-10:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-11:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-12:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 792-13:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
29.12.2009 | OJ C 214 | 08.09.2009 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 792-1:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
29.12.2009 | OJ C 214 | 08.09.2009 | 24.08.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-2:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-3:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 792-4:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 792-5:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-6:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 792-7:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-8:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 792-9:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
29.12.2009 | OJ C 214 | 08.09.2009 | 01.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 809:1998+A1:2009 Pumps and pump units for liquids - Common safety requirements EN 809:1998+A1:2009/AC:2010 |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 81-31:2010 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
20.10.2010 | OJ C 284 | 20.10.2010 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 81-31:2024 Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts EN 81-3:2000+A1:2008/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN 81-40:2020 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN 81-41:2010 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
08.04.2011 | OJ C 110 | 08.04.2011 | 20.01.2027 | OJ L | 2025/1740 | 14.08.2025 | |
| 2006/42/EC - Machinery | CEN | EN 81-41:2024 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 81-43:2009 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 81-44:2024 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines |
14.08.2025 | OJ L | 2025/1740 | 14.08.2025 | ||||
| 2006/42/EC - Machinery | CEN | EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 818-1:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-2:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-3:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-5:1999+A1:2008 Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 836:1997+A4:2011 Garden equipment - Powered lawnmowers - Safety |
18.11.2011 | OJ C 338 | 18.11.2011 | 30.09.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 848-1:2007+A1:2009 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.03.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 848-1:2007+A2:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
15.11.2012 | OJ C 350 | 15.11.2012 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN 848-2:2007+A1:2009 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.03.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 848-2:2007+A2:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN 848-3:2007+A2:2009 Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN 848-3:2012 Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
05.04.2013 | OJ C 99 | 05.04.2013 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 859:2007+A1:2009 Safety of woodworking machines - Hand fed surface planing machines |
26.05.2010 | OJ C 136 | 26.05.2010 | 31.12.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 859:2007+A2:2012 Safety of woodworking machines - Hand fed surface planing machines |
24.08.2012 | OJ C 256 | 24.08.2012 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 860:2007+A1:2009 Safety of woodworking machines - One side thickness planing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.12.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 860:2007+A2:2012 Safety of woodworking machines - One side thickness planing machines |
24.08.2012 | OJ C 256 | 24.08.2012 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 861:2007+A1:2009 Safety of woodworking machines - Surface planing and thicknessing machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.12.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 861:2007+A2:2012 Safety of woodworking machines - Surface planing and thicknessing machines |
24.08.2012 | OJ C 256 | 24.08.2012 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN 869:2006+A1:2009 Safety of machinery - Safety requirements for pressure metal diecasting units |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 894-4:2010 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN 908:1999+A1:2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 909:1998+A1:2009 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 940:2009 Safety of woodworking machines - Combined woodworking machines |
29.12.2009 | OJ C 309 | 18.12.2009 | 31.08.2012 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | CEN | EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines |
05.06.2012 | OJ C 159 | 05.06.2012 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN 953:1997+A1:2009 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN 957-6:2010+A1:2014 Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN 972:1998+A1:2010 Tannery machines - Reciprocating roller machines - Safety requirements EN 972:1998+A1:2010/AC:2011 |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN 996:1995+A3:2009 Piling equipment - Safety requirements |
29.12.2009 | OJ C 214 | 08.09.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | Cenelec | EN IEC 60204-11:2019 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 60335-2-119:2024 Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances EN IEC 60335-2-119:2024/A11:2024 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 60335-2-41:2021 Household and similar electrical appliances - Safety - Particular requirements for pumps EN IEC 60335-2-41:2021/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 60335-2-89:2022 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor EN IEC 60335-2-89:2022/A11:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | 15.05.2024 | OJ L | 2024/1329 | 15.05.2024 |
| 2006/42/EC - Machinery | Cenelec | EN IEC 60335-2-89:2022 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor EN IEC 60335-2-89:2022/A11:2022 EN IEC 60335-2-89:2022/AC:2023-11 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62061:2021 Safety of machinery - Functional safety of safety-related control systems |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-2-3:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders EN IEC 62841-2-3:2021/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-2-6:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers EN IEC 62841-2-6:2020/A11:2020 |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-3-5:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws EN IEC 62841-3-5:2022/A11:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-3-7:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws EN IEC 62841-3-7:2021/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-3-9:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws EN IEC 62841-3-9:2020/A11:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-4-3:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers EN IEC 62841-4-3:2021/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-4-5:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears EN IEC 62841-4-5:2021/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | 15.05.2024 | OJ L | 2024/1329 | 15.05.2024 |
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-4-5:2021 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears EN IEC 62841-4-5:2021/A11:2021 EN IEC 62841-4-5:2021/AC:2024-01 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-4-7:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators EN IEC 62841-4-7:2022/A11:2022 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | 15.05.2024 | OJ L | 2024/1329 | 15.05.2024 |
| 2006/42/EC - Machinery | Cenelec | EN IEC 62841-4-7:2022 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators EN IEC 62841-4-7:2022/A11:2022 EN IEC 62841-4-7:2022/AC:2023-05 EN IEC 62841-4-7:2022/AC:2023-10 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 10218-1:2008 Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006, including Cor 1:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | 01.01.2013 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 10218-1:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10218-2:2011 Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011) |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10326-1:2016 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02) |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-1:2008 Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-2:2008 Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-3:2008 Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-4:2008 Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-5:2008 Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10472-6:2008 Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 10517:2009 Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.09.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 10517:2009 Powered hand-held hedge trimmers - Safety (ISO 10517:2009) EN ISO 10517:2009/A1:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN ISO 10517:2019 Powered hand-held hedge trimmers - Safety (ISO 10517:2019) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 10821:2005 Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) EN ISO 10821:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 28.12.2009 | OJ C 309 | 18.12.2009 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11102-1:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11102-2:2009 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-1:2009 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-1:2016 Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-2:2005 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) EN ISO 11111-2:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-2:2005 Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) EN ISO 11111-2:2005/A1:2009 EN ISO 11111-2:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-3:2005 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) EN ISO 11111-3:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-3:2005 Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) EN ISO 11111-3:2005/A1:2009 EN ISO 11111-3:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-4:2005 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) EN ISO 11111-4:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-4:2005 Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) EN ISO 11111-4:2005/A1:2009 EN ISO 11111-4:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-5:2005 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) EN ISO 11111-5:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-5:2005 Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) EN ISO 11111-5:2005/A1:2009 EN ISO 11111-5:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-6:2005 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) EN ISO 11111-6:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-6:2005 Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) EN ISO 11111-6:2005/A1:2009 EN ISO 11111-6:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-7:2005 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) EN ISO 11111-7:2005/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 09.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11111-7:2005 Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) EN ISO 11111-7:2005/A1:2009 EN ISO 11111-7:2005/A2:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11145:2008 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11145:2016 Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-10:2011 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-11:2011 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-12:2012 Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-13:2018 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-1:2011 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) |
24.08.2012 | OJ C 256 | 24.08.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-2:2011 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-3:2010 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | 30.06.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-3:2012 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-4:2010 Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools (ISO 11148-4:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | 30.06.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-4:2012 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-5:2011 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-6:2010 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | 30.06.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-6:2012 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-7:2012 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-8:2011 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11148-9:2011 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11161:2007 Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) EN ISO 11161:2007/A1:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11200:2009 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:1995, including Cor 1:1997) |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11200:2014 Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
13.02.2015 | OJ C 54 | 13.02.2015 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11201:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11202:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) EN ISO 11202:2010/A1:2021 |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) EN ISO 11203:2009/A1:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11204:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO 11204:1995, including Cor 1:1997) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2010 | OJ C 284 | 20.10.2010 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11204:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11205:2009 Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11252:2008 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004) |
29.12.2009 | OJ C 214 | 08.09.2009 | 28.02.2014 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11252:2013 Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11546-1:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11553-1:2020 Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) EN ISO 11553-1:2020/A11:2020 |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11553-2:2008 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11553-3:2013 Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11554:2008 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11554:2017 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11680-1:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Units fitted with an integral combustion engine (ISO 11680-1:2000) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11680-1:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11680-1:2021 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11680-2:2008 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Units for use with a back-pack power source (ISO 11680-2:2000) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11680-2:2011 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11680-2:2021 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11681-1:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11681-1:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11681-1:2022 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11681-2:2008 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11681-2:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11681-2:2011 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011) EN ISO 11681-2:2011/A1:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11681-2:2022 Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 11806-1:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11806-1:2022 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11806-2:2011 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11806-2:2022 Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11806:2008 Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 09.09.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011) EN ISO 11850:2011/A1:2016 |
09.09.2016 | OJ C 332 | 09.09.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 11850:2011 Machinery for forestry - General safety requirements (ISO 11850:2011) EN ISO 11850:2011/A1:2016 EN ISO 11850:2011/A2:2022 Restriction: With regard to paragraph 4.4 a), first paragraph, first indentation, as well as reference to standard EN ISO 2867:2011, table 6 to paragraphs 8 and 9, maximum dimension for “A” and note a) maximum first step height dimension, this publication does not confer a presumption of conformity to the essential health and safety requirements 1.1.6., 1.5.15. and 1.6.2. of Annex I to Directive 2006/42/EC. |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 11957:2009 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 12100-1:2003 Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-1:2003/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 12100-2:2003 Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) EN ISO 12100-2:2003/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13482:2014 Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
11.07.2014 | OJ C 220 | 11.07.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13753:2008 Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13766-2:2018 Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 13849-1:2008 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13849-1:2008/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | 15.05.2027 | OJ L | 2024/1329 | 15.05.2024 | |
| 2006/42/EC - Machinery | CEN | EN ISO 13849-1:2023 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2023) |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 13849-2:2008 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2003) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.04.2013 | OJ C 99 | 05.04.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 13849-2:2012 Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13850:2008 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 13850:2015 Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13851:2019 Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 13854:2019 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 13855:2010 Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13856-1:2013 Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13856-2:2013 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13856-3:2013 Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 14118:2018 Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 14119:2013 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013) |
11.04.2014 | OJ C 110 | 11.04.2014 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2013 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-1:2001 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001) EN ISO 14122-1:2001/A1:2010 |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.12.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-1:2016 Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-2:2001 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001) EN ISO 14122-2:2001/A1:2010 |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.12.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-2:2016 Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-3:2001 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001) EN ISO 14122-3:2001/A1:2010 |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.12.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-3:2016 Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-4:2004 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004) EN ISO 14122-4:2004/A1:2010 |
08.04.2011 | OJ C 110 | 08.04.2011 | 31.12.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 14122-4:2016 Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14123-1:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14123-2:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14159:2008 Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14738:2008 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 15012-4:2016 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) |
09.06.2017 | OJ C 183 | 09.06.2017 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 15744:2008 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16089:2015 Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16092-1:2018 Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 16092-2:2020 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019) |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 16092-3:2018 Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 16092-4:2020 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019) |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 16093:2017 Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017) |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16119-1:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16119-2:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16119-3:2013 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16119-4:2014 Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16230-1:2015 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16231-1:2013 Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 16231-2:2015 Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 17916:2016 Safety of thermal cutting machines (ISO 17916:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 18217:2015 Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
15.01.2016 | OJ C 14 | 15.01.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 18497:2018 Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-10:2019 Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) EN ISO 19085-10:2019/A11:2020 |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-11:2020 Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-12:2021 Woodworking machines - Safety - Part 12: Tenoning/profiling machines (ISO 19085-12:2021) EN ISO 19085-12:2021/A11:2023 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-13:2020 Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-14:2021 Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-15:2021 Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-16:2021 Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-17:2021 Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-1:2017 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
09.03.2018 | OJ C 92 | 09.03.2018 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN ISO 19085-1:2021 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021) |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-2:2017 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01) |
09.03.2018 | OJ C 92 | 09.03.2018 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 19085-2:2021 Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-3:2017 Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) Restriction: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass. |
24.10.2019 | OJ L 270 | 2019/1766 | 24.10.2019 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 |
| 2006/42/EC - Machinery | CEN | EN ISO 19085-3:2021 Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-4:2018 Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-5:2017 Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017) |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-6:2017 Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-7:2019 Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-8:2018 Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19085-9:2020 Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 |
| 2006/42/EC - Machinery | CEN | EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) EN ISO 19225:2017/A1:2019 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19296:2018 Mining - Mobile machines working underground - Machine safety (ISO 19296:2018) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19353:2016 Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) |
09.09.2016 | OJ C 332 | 09.09.2016 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN ISO 19353:2019 Safety of machinery - Fire prevention and fire protection (ISO 19353:2019) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19432-1:2020 Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19432:2008 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
15.11.2012 | OJ C 350 | 15.11.2012 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 19472-2:2022 Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 19932-1:2013 Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 19932-2:2013 Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 20361:2009 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | 09.09.2016 | OJ C 332 | 09.09.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 20361:2015 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) |
09.09.2016 | OJ C 332 | 09.09.2016 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 20361:2019 Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) EN ISO 20361:2019/A11:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) |
15.10.2021 | OJ L 366 | 2021/1813 | 15.10.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 20607:2019 Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 20643:2008 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.01.2013 | OJ C 350 | 15.11.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 20643:2008 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005) EN ISO 20643:2008/A1:2012 |
15.11.2012 | OJ C 350 | 15.11.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 2151:2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 21904-1:2020 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 22291:2022 Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 22867:2008 Forestry machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2004, including Cor 1:2006) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.06.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 22867:2011 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 22867:2021 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 22868:2008 Forestry machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.09.2011 | OJ C 214 | 20.07.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 22868:2011 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011) |
20.07.2011 | OJ C 214 | 20.07.2011 | 11.10.2023 | OJ L 115 | 2022/621 | 13.04.2022 | |
| 2006/42/EC - Machinery | CEN | EN ISO 22868:2021 Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021) |
13.04.2022 | OJ L 115 | 2022/621 | 13.04.2022 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 23062:2022 Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 23125:2010 Machine tools - Safety - Turning machines (ISO 23125:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | 31.10.2012 | OJ C 256 | 24.08.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 23125:2010 Machine tools - Safety - Turning machines (ISO 23125:2010) EN ISO 23125:2010/A1:2012 |
24.08.2012 | OJ C 256 | 24.08.2012 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 23125:2015 Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 25119-1:2023 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018) EN ISO 25119-1:2023/A1:2023 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 25119-2:2023 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019) |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 25119-3:2023 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018) EN ISO 25119-3:2023/A1:2023 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 25119-4:2023 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018) EN ISO 25119-4:2023/A1:2023 |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 2860:2008 Earth-moving machinery - Minimum access dimensions (ISO 2860:1992) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 2867:2008 Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.07.2014 | OJ C 338 | 18.11.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 2867:2011 Earth-moving machinery - Access systems (ISO 2867:2011) |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28881:2013 Machine tools - Safety - Electro-discharge machines (ISO 28881:2013) EN ISO 28881:2013/AC:2013 |
28.11.2013 | OJ C 348 | 28.11.2013 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 28881:2022 Machine tools - Safety - Electrical discharge machines (ISO 28881:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011) |
18.11.2011 | OJ C 338 | 18.11.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-11:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011) |
20.07.2011 | OJ C 214 | 20.07.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-12:2012 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012) |
05.04.2013 | OJ C 99 | 05.04.2013 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-13:2022 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-1:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009) EN ISO 28927-1:2009/A1:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 28927-1:2019 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-2:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | 02.10.2021 | OJ L 75 | 2020/480 | 19.03.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 28927-2:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) EN ISO 28927-2:2009/A1:2017 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-3:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-4:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | 02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN ISO 28927-4:2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010) EN ISO 28927-4:2010/A1:2018 |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-5:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | 31.03.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-5:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009) EN ISO 28927-5:2009/A1:2015 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-6:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-7:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-8:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | 30.06.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-8:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009) EN ISO 28927-8:2009/A1:2015 |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 28927-9:2009 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009) |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3164:2008 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:1995) |
29.12.2009 | OJ C 214 | 08.09.2009 | 30.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3164:2013 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | 16.03.2026 | OJ L | 2024/2408 | 16.09.2024 | |
| 2006/42/EC - Machinery | CEN | EN ISO 3164:2013 Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013) EN ISO 3164:2013/A1:2024 |
16.09.2024 | OJ L | 2024/2408 | 16.09.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) |
20.10.2010 | OJ C 284 | 20.10.2010 | 30.06.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010) EN ISO 3266:2010/A1:2015 |
13.05.2016 | OJ C 173 | 13.05.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3450:2008 Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996) |
29.12.2009 | OJ C 214 | 08.09.2009 | 31.05.2012 | OJ C 61 | 29.02.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3450:2011 Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011) |
29.02.2012 | OJ C 61 | 29.02.2012 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3457:2008 Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-1:2015 Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) EN ISO 3691-1:2015/AC:2016 |
15.01.2016 | OJ C 14 | 15.01.2016 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 3691-1:2015 Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) EN ISO 3691-1:2015/AC:2016 EN ISO 3691-1:2015/A1:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-4:2023 Industrial trucks - Safety requirements and verification - Part 4: Driverless industrial trucks and their systems (ISO 3691-4:2023) |
15.05.2024 | OJ L | 2024/1329 | 15.05.2024 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-5:2009 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2009) |
28.11.2013 | OJ C 348 | 28.11.2013 | 31.08.2014 | OJ C 220 | 11.07.2014 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-5:2014 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) EN ISO 3691-5:2014/AC:2014 |
11.07.2014 | OJ C 220 | 11.07.2014 | 02.10.2021 | OJ L 102 | 2020/480 | 02.04.2020 | |
| 2006/42/EC - Machinery | CEN | EN ISO 3691-5:2015 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 |
| 2006/42/EC - Machinery | CEN | EN ISO 3691-5:2015 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) EN ISO 3691-5:2015/A1:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-6:2013 Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) EN ISO 3691-6:2013/AC:2014 |
11.07.2014 | OJ C 220 | 11.07.2014 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3691-6:2015 Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013) EN ISO 3691-6:2015/AC:2016 |
13.05.2016 | OJ C 173 | 13.05.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 3691-6:2021 Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3741:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3743-1:2009 Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms (ISO 3743-1:1994) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3743-1:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) |
29.12.2009 | OJ C 309 | 18.12.2009 | 15.04.2023 | OJ L 366 | 2021/1813 | 15.10.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 3743-2:2019 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 3744:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.04.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3745:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and semi-anechoic rooms (ISO 3745:2003) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.09.2012 | OJ C 159 | 05.06.2012 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) |
05.06.2012 | OJ C 159 | 05.06.2012 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012) EN ISO 3745:2012/A1:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3746:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:1995, including Cor 1:1995) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.06.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 3747:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000) |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.06.2011 | OJ C 110 | 08.04.2011 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-10:2009 Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009) EN ISO 4254-10:2009/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) EN ISO 4254-11:2010/A1:2020 |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-12:2012 Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) |
24.08.2012 | OJ C 256 | 24.08.2012 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-12:2012 Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012) EN ISO 4254-12:2012/A1:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-14:2016 Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-17:2022 Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-1:2009 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008) EN ISO 4254-1:2009/AC:2010 |
29.12.2009 | OJ C 309 | 18.12.2009 | 30.11.2013 | OJ C 348 | 28.11.2013 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-1:2013 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | 13.05.2016 | OJ C 173 | 13.05.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) |
13.05.2016 | OJ C 173 | 13.05.2016 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 4254-1:2015 Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013) EN ISO 4254-1:2015/A1:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-5:2009 Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2008) EN ISO 4254-5:2009/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 4254-5:2018 Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-6:2009 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) EN ISO 4254-6:2009/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 02.02.2025 | OJ L 194 | 2023/1586 | 02.08.2023 | |
| 2006/42/EC - Machinery | CEN | EN ISO 4254-6:2020 Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020) EN ISO 4254-6:2020/A11:2021 |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-7:2009 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) EN ISO 4254-7:2009/AC:2010 |
26.05.2010 | OJ C 136 | 26.05.2010 | 19.09.2020 | OJ L 286 | 2019/1863 | 07.11.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 4254-7:2017 Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-8:2018 Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4254-9:2018 Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018) |
02.04.2020 | OJ L 102 | 2020/480 | 02.04.2020 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4414:2010 Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
08.04.2011 | OJ C 110 | 08.04.2011 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 5010:2019 Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 5136:2009 Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-1:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | 19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 5395-1:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) EN ISO 5395-1:2013/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-2:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | 30.06.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-2:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) EN ISO 5395-2:2013/A1:2016 |
09.06.2017 | OJ C 183 | 09.06.2017 | 30.06.2018 | OJ C 92 | 09.03.2018 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-2:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013) EN ISO 5395-2:2013/A1:2016 EN ISO 5395-2:2013/A2:2017 |
09.03.2018 | OJ C 92 | 09.03.2018 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-3:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) |
28.11.2013 | OJ C 348 | 28.11.2013 | 31.08.2017 | OJ C 183 | 09.06.2017 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 5395-3:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) EN ISO 5395-3:2013/A1:2017 |
09.06.2017 | OJ C 183 | 09.06.2017 | 19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | |
| 2006/42/EC - Machinery | CEN | EN ISO 5395-3:2013 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) EN ISO 5395-3:2013/A1:2017 EN ISO 5395-3:2013/A2:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 5674:2009 Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 6683:2008 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 7096:2008 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) EN ISO 7096:2008/AC:2009 |
29.12.2009 | OJ C 214 | 08.09.2009 | 03.09.2022 | OJ L 72 | 2021/377 | 03.03.2021 | |
| 2006/42/EC - Machinery | CEN | EN ISO 7096:2020 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020) |
03.03.2021 | OJ L 72 | 2021/377 | 03.03.2021 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 8230-1:2008 Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 8230-2:2008 Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) |
29.12.2009 | OJ C 214 | 08.09.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 8528-10:2022 Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022) |
02.08.2023 | OJ L 194 | 2023/1586 | 02.08.2023 | ||||
| 2006/42/EC - Machinery | CEN | EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) |
09.09.2016 | OJ C 332 | 09.09.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9614-3:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) |
29.12.2009 | OJ C 309 | 18.12.2009 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-1:2001 Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) EN ISO 9902-1:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 29.02.2016 | OJ C 14 | 15.01.2016 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-1:2001 Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001) EN ISO 9902-1:2001/A1:2009 EN ISO 9902-1:2001/A2:2014 |
15.01.2016 | OJ C 14 | 15.01.2016 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-2:2001 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) EN ISO 9902-2:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-2:2001 Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001) EN ISO 9902-2:2001/A1:2009 EN ISO 9902-2:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-3:2001 Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) EN ISO 9902-3:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-3:2001 Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001) EN ISO 9902-3:2001/A1:2009 EN ISO 9902-3:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-4:2001 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) EN ISO 9902-4:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-4:2001 Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001) EN ISO 9902-4:2001/A1:2009 EN ISO 9902-4:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-5:2001 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) EN ISO 9902-5:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-5:2001 Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001) EN ISO 9902-5:2001/A1:2009 EN ISO 9902-5:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-6:2001 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) EN ISO 9902-6:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-6:2001 Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001) EN ISO 9902-6:2001/A1:2009 EN ISO 9902-6:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-7:2001 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) EN ISO 9902-7:2001/A1:2009 |
29.12.2009 | OJ C 309 | 18.12.2009 | 13.02.2015 | OJ C 54 | 13.02.2015 | ||
| 2006/42/EC - Machinery | CEN | EN ISO 9902-7:2001 Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001) EN ISO 9902-7:2001/A1:2009 EN ISO 9902-7:2001/A2:2014 |
13.02.2015 | OJ C 54 | 13.02.2015 | |||||
| 2006/42/EC - Machinery | CEN | EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) EN ISO/IEC 80079-38:2016/A1:2018 |
19.03.2019 | OJ L 75 | 2019/436 | 19.03.2019 | ||||
Column legend
Reference information on legislation and standards
A. Reference number of a relevant Directive or Regulation under which it was published in the OJ
B. European standardisation organisation that adopted the relevant standard
C. Reference number of a relevant European standard or of a European standard and its amendment(s)
D. Title of a European standard
E. type standards A, B, C:
- A-type standards
A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity (OJ C 348, 28.11.2013).
- B-type standards
B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B- type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards (OJ C 348, 28.11.2013).
- C-type standards
C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard (OJ C 348, 28.11.2013).
Dates and OJ references for establishing a presumption of conformity
1. Date when a presumption of conformity starts or started in cases where a reference was published in the OJ without restriction. This date is usually, but not always, the same as the OJ reference date in column (2)
2. Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ without restriction
Dates and OJ references for establishing a presumption of conformity
3. Restriction published in the OJ to restrict a presumption of conformity – this includes restrictions on the basis of formal objections
4. Date when a presumption of conformity with restriction starts or started in cases where a reference was published in the OJ with restriction. This date is usually, but not always, the same as the date in column (5)
5. Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ with restriction
Dates and OJ references for establishing a presumption of conformity
6. Date when a presumption of conformity ends or ended
7. Reference number and date of a relevant publication in the L or C series of the OJ where the date of withdrawal from the OJ (date in column (6)) was published
- Published: 24 August 2023
- Hits: 56818
